Four lenses with 256 5mm Red, green and blue LEDs create multiple shaped and coloured beams of light.

DMX 512 ¦ Dipswitch addressing ¦ 10 Channels ¦ Stand alone, master/slave and sound to light functions ¦ Power Consumption - 25w ¦ 220-240v/AC ¦  IP20 ¦ Dual single yoke mounting brackets ¦ Dimensions 145 x 940 x 90mm ¦ Weight 5kg ¦ Finish - Black ¦ Indoor use only

ADJ's Quad Phase HP is designed to fill a room and dazzle a crowd with dozens of razor sharp beams of light.

Sound Active, Master/Slave or DMX-512/4 Channel ¦ Built-in programs - Sound Active & Master/Slave modes ¦ 15 Preset Colours ¦ Linkable via 3-pin XLR cable ¦ 4-button DMX display on rear panel ¦ 65 degree beam angle ¦ Strobe & Pulse LED Effect ¦ Electronic Dimming: 0 - 100%

Specifications:

IEC AC IN/OUT on rear to daisy chain power (up to 9 Quad Phase HP’s @ 230V ) ¦ Power Draw: 64W Max ¦ Multi voltage: 100V~240V, 50/60Hz ¦ Long life LEDs (30,000 hr. rating) ¦ Light Source: 32W RGBW LED 4-in-1 ¦ Dimensions (LxWxH): 312 x 198 x 279mm ¦ Weight: 4 kg ¦ Safety hook on rear panel ¦ Includes a Wireless IR Remote ¦ Indoor use only.

The Pulsar Monster Strobe utilises the patented Pulsar strobe circuitry to produce an absolutely amazing effect.

Supplied with remote control unit ¦ Indoor use only.

The VIS035 (WR684) can be controlled via DMX (wireless or wired connection), as a stand-alone unit with built-in programs, or activated by the on-board microphone, and powered by mains or built-in rechargeable battery. We have bespoke adjustable base-plates which enable the units to sit close to the floor when used as uplighters.

Rechargeable (10 hour runtime approx) | 6 x 8W RGBW LED | Beam angle 25° | Set up - Digital display | Wireless DMX - 7 frequencies | Stand alone, wireless M/S and sound to light | Floor or Truss mounting | Power consumption - 95W | Supply - 240vAC- 60Hz | Dim: 305 x 270 x 163mm | Weight: 5kg | Indoor Use Only

These impressively bright, rugged metal housing LED units are rated at IP65 so can be used outdoors with confidence.

Robust multipar design ¦ Double yoke bracket for floor/truss mounting ¦ 12 x 8w 4 in 1 RGBW LEDs ¦ Beam angle: 25° ¦ Supply: 110/240v/AC - 50/60Hz ¦ Max. Power Consumption: 108W ¦ DMX 512 - 1/4/5/7 Channels ¦ 3 pin DMX in and through ¦ IP65 3 pin Power in and through ¦ Stand alone & master/slave functions ¦ IP65 rated for indoor and outdoor use ¦ Weight: 5.4kg.

LEDJ Spectra Floods are perfect for feature lighting, providing colour wash effects to the outside of buildings. Simple daisy chain connection of power and DMX means that installation time and cost is reduced.

18 x 3W tri-colour LEDs (RGB) | Beam angle: 40° | 2,150 Lux @ 2m (full on) | 7.8kHz refresh rate | DMX channels: 1/3/4/5 or 6 selectable | Static colour, colour fade, colour change, colour mix, auto and master/slave modes | 0 - 100% dimming and variable strobe | 4 push button menu with LED display | IP rated power input/output trailing connections | IP rated 3-Pin DMX input/output trailing connections | Power consumption: 65W | Power supply: 100~240V, 50/60Hz | IP rating: IP66 | Dimensions: 225 x 325 x 192mm | Weight: 4.5kg

This Sunstrip is fully active and has a built-in dimmer. For easy mounting it is equipped with two Wall/Floor brackets along with a choice of positions to mount clamps.

10 x 240V/50W GU10 ¦ 16 Built in Programs - Sound Active / Master/Slave / DMX ¦ DMX 512/1,2,5,or 10 Channels ¦ Neutrik Powercon in & out ¦ DMX In & Out (3 Pin) ¦ Dimensions: 1000 x 130 x 77 mm ¦ Weight: 5.3 Kg ¦ Mounting/Floor brackets ¦ Indoor use only.

NB - Prices quoted per single unit.

The Visage 054 LED Battens feature high power RGBW LEDs giving strong vibrant colours. Each unit can be controlled via DMX utilising either 7/11/19 or 51 channels. Multiple units can be linked together, utilising the IEC in/out and DMX in/out connections, to create seamless cyclorama lighting or wall-washing.

NB: Prices quoted per single unit.

12 x 8w 4 in 1 RGBW LEDs ¦ Beam angle 40° ¦  Power Consumption 120w ¦ Supply - 100/240v/AC - 60/50Hz ¦ Display - Digital ¦ DMX 512/51 Channels / stand alone, master / slave and sound to light functions ¦ Optional IR Remote (VIS055C available separately) ¦ Integral bracket for truss or floor mounting ¦ Dimensions 1100 x 180 x 165mm ¦ Weight 6.5kg ¦ Indoor use only.

The 500W Coda 1 is a reversible asymmetric floodlight for lighting a cyclorama or backdrop from the top or bottom. The asymmetrical light distribution ensures an even colour wash over a large area.

Weight: 3.50Kg ¦ Light Source: K1 ¦ Plug type: 15amp ¦ Lamp power: 500W ¦ Fixture power: 500W ¦ Indoor use only.

The Evora 1000BSW is a 3-in-1 hybrid moving head with super smooth 3 phase motors. Featuring a 180W LED its output is ample for most events. With the ability to switch between a beam, spot and wash this fixture offers a huge potential of creativity with a fully variable beam angle for projecting patterns onto walls or generating stunning mid-air effects.

1 x 180W white LED

- Beam angle: 4.5° (Beam), 20° (Spot), 45° (Wash)

- 4.5° - 5,220 Lux @ 10m, 20° - 720 Lux @ 10m, 45° - 163 Lux @ 10m

- 3.6kHz refresh rate

- Motorised zoom and focus

- 8 facet circular rotating indexable prism plus 6 facet linear rotating indexable prism

- Frost filter

- Gobo wheel 1: 9 rotating, indexable, replaceable gobos + open

- Gobo wheel 2: 15 static gobos + open

- Colour wheel: 9 colours + 3200K + open

- DMX channels: 16

- RDM (Remote Device Management)

- Auto, sound active and master/slave modes

- Pan/tilt auto correction

- 16-Bit pan/tilt positioning

- Pan: 540° or 630° selectable, Tilt: 270°

- 0-100% dimming and variable strobe

- Supplied with quick release omega clamps

- 6 push button menu with 1.8” LCD display

- Display battery backup for offline configuration

- PowerCON input/output

- 3-Pin XLR input/output

- 5-Pin XLR input/output

- Fan cooled

- Weight: 19.50kgs

The eLumen8 Kudos 350ZS utilises 19 x 15W quad-colour (RGBW) LEDs combined with a motorised zoom (5°– 60°) offering superior colour mixing, producing vibrant colours and hues outputting a perfectly even wash. This dynamic yet compact moving head also features a vivid RGB backlight creating stunning ‘eye candy’ effects.

19 x 15W Osram Ostar™ quad-colour LEDs (RGBW)

- RGB backlight for dual colour effects

- Adjustable beam angle: 5°- 60°

- 5° - 31,140 Lux @ 2m (full on), 60° - 2,246 Lux @ 2m (full on)

- 4kHz refresh rate

- Motorised zoom

- DMX channels: 8/10/16 or 26 selectable

- Auto, sound active, manual control and master/slave modes

- Pan/tilt auto correction

- 360° continuous pan and tilt

- 16-Bit pan/tilt positioning

- 0 - 100% dimming and variable strobe

- 4 dimming curves: Linear, square law, inverse square law and S-curve

- Supplied with quick release omega clamps

- Jog wheel menu with 2” LCD display

- PowerCON input/output

- 5-Pin XLR input/output

- 3-Pin XLR input/output

- Fan cooled

- Weight: 9.10kgs

The Rogue R2 Spot offers a stunning range of colours and effects, two variable scrolling colour wheels for an unlimited number of shape-changing and split-colour effects. Rogue R2 Spot uses a powerful 240 W LED light source in a 16.5° beam angle for a brilliant light that creates an unparalleled audience experience.

Optical:

Light Source: 1 LEDs (CW) 240 W, (7 A), 8250 K | Colour Temperature (at full): 8500 K | Beam Angle: 16.5° | Luminance : 5,500 lux @ 5 m | PWM Frequency: 1,470 Hz

Dynamic Effects:

Pan and Tilt: 540°/250° | Pan and Tilt Ranges: 180°, 360°, 540° pan/90°, 180°, 250° tilt |

Colours (1): 7 + white, split colours, continuous scroll at variable speeds

Colours (2): 7 + white, split colours, continuous scroll at variable speeds

Gobos (1): 7 + open (7 metal), rotating, interchangeable, indexing, slot-n-lock, continuous scroll at variable speeds

Gobos (2): 8 + open (8 metal), continuous scroll at variable speeds

Dimmer: Electronic | Shutter/Strobe: Electronic | Focus: Motorized | Frost: Motorized | Iris: Motorized | Prism: 3 Facets, motorized, rotating | Strobe Rate: 0 to 22 Hz |Move in Dark: Yes

Control:

Control Protocol: DMX | DMX Channels: 18 or 21

Connections:

Power Input: Neutrik powerCON | Power Output: Neutrik powerCON | Data Connectors: 3 and 5-pin XLR

Electrical:

Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)

Power Linking: 9 units @ 230 V | Power and Current: 301 W, 1.4 A @ 230 V, 50 Hz

Construction:

Dimensions (single unit): 409 x 343 x 489 mm | Weight (single unit): 21.2 kg | Exterior Colour: Black | Housing Material: High-impact flame-retardant polymer

Certifications:

CE | MET | IP Rating: IP20, dry location

600W Coolbeam Zoom Spotlight offers excellent light output, superb distribution and focus.  The Zoomspot is compact, easy to use and maintain. The superb optics produce the smoothest soft edge while maintaining beam size.

Indoor use only.

Gobo holders are available for an additional small charge.

We can supply Gobos to order.

600W Coolbeam Zoom Spotlight offers excellent light output, superb distribution and focus.  The Zoomspot is extremely compact, easy to use and maintain. The superb optics produce the smoothest soft edge while maintaining beam size.

Indoor use only.

NB: Gobo holders are available for an additional small charge.

We can supply Gobos to order.

Great for applications on the small stage or in clubs and retail events, the Source Four Junior Zoom boasts rugged ETC fixture construction and all the celebrated precision optics of a Source Four.

25deg-50deg Beam Angle ¦ Super-efficient HPL575 lamp ¦ Faceted dichroic reflector removes 90% of IR heat from beam ¦ Two-plane stainless-steel shutter blade assembly ¦ M Size Gobo ¦ Indoor use only.

NB: Gobo holders are available for an additional small charge.

We can supply Gobos to order.

1000w | gel frame included | Indoor use only

1000W | Gel frame included | Indoor use only

The Strand Lighting Sixer portable DMX512 is a small, simple to use, single-preset lighting control for six DMX512 lighting channels through its channel faders and Grand Master.

Compact size, easy to use | Six individual channel faders and one Grand Master | Standard 5-pin DMX512 output connector | Operates with supplied AC to 9-volt DC adapter or 9-volt battery | On-board On/Off switch to save battery life when not in use.

Input: 13amp via Transformer or 9v Battery ¦ Output: DMX ¦ Channels: 6

The Zero88 Juggler is a manual lighting control desk specifically designed for the smaller stage; a perfect solution for small scale lighting systems.

Channel faders are set in a conventional two preset layout for easy crossfading. A fade time control allows smooth fades to be achieved over periods as long as 5 minutes.

All crossfades are true dipless. This ability to hold constant lighting levels and varying fade times allows sophisticated lighting plots to be replayed simply and accurately. Juggler controls up to 24 channels using preset faders avoiding the cost and complexity of more sophisticated lighting desks. Applications include schools, houses of worship, rental and conference events. For larger shows, the wide mode feature allows 24-channel operation, with an internal scene store for two-preset operation. 12 sequences of 99 steps can be stepped manually to provide a simple cue list with go button functionality. Sequences may also be chased using the adjustable speed control.

Two Preset Operation | 12/24 Channels | Flash Buttons | 12 Sequences of 99 Steps | Multiple Channels per Step | Sequence Master | 19” Rack Mounting | Fade Timer | Speed Control | True Dipless Crossfade | Grand Master | Wide Mode.

Weight: 9.25Kg ¦ Input: 13amp ¦ Output: DMX ¦ Indoor use only.

The Jester ML lighting console offers direct control of up to 30 fixtures using fixture select buttons and three control wheels. Replay is via a traditional theatre playback stack or submasters when connected to an external DMX desk as a fader bank.

A DMX-in port allows the Jester ML to be used as a back-up console for other desks. It is possible to snapshot a full 512 channels of DMX into submasters or the memory stack. Up to 48 channels and 24 submasters can be controlled by using a DMX desk connected to the DMX Input as a ‘wing’.

The Jester ML has three modes, allowing it to operate in preset, program or playback mode. MIDI notes can be used to trigger channels or submasters. A sound to light jack allows for chases to be sequenced to music. Chases can be recorded into the memory stack or directly into submasters.

The Jester ML provides users with a powerful set of programming and playback tools for intelligent fixtures in an easy to use lighting console.

Indoor use only.

The Zero88 Jester ML 48 lighting console from Zero 88 enables the control of up to 30 moving lights, and the ability to store palettes and preset focuses.  It also offers direct control of 48 dimmer channels.

Playback is either via the submasters or through a traditional theatrical cue stack.

Channel, cuestack and submaster data can all be viewed using a monitor which can be supplied. The on-board LCD screens allow users to view all information needed to operate the console allowing it to be used without a monitor if preferred. A USB port allows users to back-up shows that have been recorded on the ML.

The Jester ML has three modes, allowing it to operate as a simple two scene preset desk through to a fully functional memory console. In playback mode the user has full access to all the channels on the console. This allows live changes to be made to specials instantly. MIDI notes can be used to trigger channels or submasters. A sound to light jack allows for chases to be sequenced to music. Chases can be recorded into the memory stack or directly into submasters.

The Jester ML provides users with a powerful set of programming and playback tools in an easy to use lighting console.

Indoor use only.

MagicQ MQ40N is part of a new generation of small and lightweight MagicQ Consoles specifically designed for travelling lighting designers. Based on the same ARM technology used in modern phones and tablets the MagicQ MQ40N has lower power consumpton and does not require a fan - enabling silent operation for theatrical and corporate shows.

MagicQ MQ40N features a simplified version of the MagicQ GUI, designed to make the console simple and easy to use for installations, clubs and schools while still featuring advanced features such as MagicVis and MagicHD connectivity options and in-built Pixel Mapper found in all other MagicQ consoles, and utilises the same software and show formats, enabling compatibility between all products in the MagicQ range.

Tracking / non-tracking option

Fixture, FX and Gel Library

In-built Fixture Editor

Fixture Morphing & Cloning

Powerful PC/Mac Show Editor

Rainbow colour picker (CMY, RGB, HSI)

Individual fade times on any channel

Easy fanning of parameters and times

Configurable faders - HTP, LTP, speed, size, masters

Theatre mark cues, split fades and inhibit masters

Specification:

Universes: 4 / Channels: 2048 / Number of fixtures: Up to 2048 / Cues: 5000 / Cue stacks: 2000 / Palettes: 4096 / Groups: 5000 / Numbers of shows: Virtually unlimited / Encoders: 8 / Faders: 12 / Rear panel USB ports: 4 / Audio input (1 channel, 7 band): Yes / Network ports: 1 / Display ports: 1 VGA (fixed resolution 1024x768, non touch) / Desk lamp: 1 dual colour / Dust cover: 1

Power input: 110 to 240 VAC

Dimensions: Width: 525mm (20.7") / Depth: 385mm (15.2") / Height: 140mm (5.5") / Weight: 6.5kg (14.3lb)

Flightcased dimensions: / Width: 600mm (23.6") / Depth: 520mm (20.5") / Height: 240mm (9.5") / Weight: 15kg (33lb)

The Quartz is the newest addition to the Titan Mobile family, complete with on-board processing and a bright, vibrant 12.1” screen, in our smallest full-featured console.

Super compact form - just 42.5cm wide | 4 physical DMX XLR-5 connectors | 16 DMX universes from the console - 8192 channels | Compatible with Titan Net - up to 64 universes | Gigabit network port for Titan Net, Artnet and streaming ACN | Built in MIDI input, no extra boxes required | 10 precision playback faders | 3 high quality optical encoders | Compatible with Titan Remote | 20 programmable macro buttons | Supports multi-band Sound-to-Light | Bright and vibrant 12.1" angled touch screen with brightness control | DVI-D for external display | Headphone output | Button layout harmonised with the rest of the Titan range | Robust construction - built for life on the road | Conveniently located front panel mounted super speed USB3 port | Expandable with Titan Mobile Wing through dedicated USB port |

Weight flightcased: 15.5 kgs.

The SnakeSys B4 is a four universe DMX to Ethernet convertor. It supports four DMX512 ports that are configurable as either inputs or outputs and one DMX port that is always assigned as an input. The SnakeSys B4 is designed as a multi purpose box to be used in places where a small portable Ethernet to DMX conversion solution is required.

Four DMX512 ports via female 5-pin XLR | One DMX512 dedicated input port via male 5-pin XLR | Art-Net, ACN Streaming DMX protocols | Can be powered by Power over Ethernet | Isolated outputs | Art-Net subnet and universe selection via rotary switches | Power, Network and Protocol status LEDs | Individual output status LEDs | Locking Neutrik Ethercon network connector | Locking Neutrik Powercon power connector.

Input voltage: 90 to 250V AC | Width: 168mm | Depth: 164mm | Height: 60mm | Weight: 861g

Lightweight lighting bars - with or without T-Bars.

*Priced per stand

Heavy Duty Winch Stand.

Maximum Height of 3.9m | Minimum Height: 2.1m | Maximum Load: 60Kg | Extendible Legs for Uneven Surfaces | Weight: 33kg | Top Pole Dia: 35mm | Spread: 1.4m.

*Priced per stand.

Complete Stage Lighting Support System comprising of 4 Heavy Duty Wind Up Stands and

10m of Trio Truss. Additional truss available.

Maximum Load: 200Kg evenly distributed | Maximum Height: 3.9m | Minimum Height: 2.1M | Total Weight: 145kg